Venus Enterprises is one of the best performing, highly efficient manufacturer of Circlips, E-type circlips, Disc Washers, Snap Rings and as per as per IS & Din Standards or as per Customers design & Specifications in India and is the Market leader since inception.
Venus has pioneered the innovative standard in Sheet Metal & Wire Industries. We have excellent Manufacturing Facilities, with Latest Machineries. We have been supplied our products to Automobiles, Electronics, Electrical, Textiles, Defense & Railways.
Some of our strengths that have provided us the winning edge in the industry are
To various industries like automobiles, textiles, aviation, defense, railways etc.
Venus Enterprises is a leading manufacturer of sheet metal and wire components with production facilities located in Bharatpur, Rajasthan, India. The company extensive manufacturing capabilities include Circlips, Snap Rings, Disc washer, etc.
Constantly innovating and ensuring timely supply of quality products at competitive prices Setting standards of excellence through global benchmarking
We aspire to be the most preferred and reliable provider of Circlips, Disc washer, U.J Cross Lock, Snap Rings & supplies India and globally, with constant commitment towards technological excellence.
We develop and innovate new products with specific emphasis on customer satisfaction. We at our manufacturing site, maintain a structured set of general and detailed written procedures, which cover all the recognized elements of a quality assurance system. Our growth philosophy lies in the amalgamation of infrastructure, human resources, comfort level of the final consumer while keeping the costs in check.
We use our engineering and service experience to provide our customer with fast, friendly service, cost effective solutions and quality parts.
We design and manufacture a wide range of circlips. Used as a fastener, these products are semi-flexible metal ring that comes with open ends. We offer both the types of circlips that are internal and external. The different kinds of circlips offered by us can vary in terms of dimensions and type of raw materials used. We also manufacturer and supply Snap Ring and Horse Clamp.
External Circlip (Light Series)
DIN : 471 IS : 3075
External Circlip
External Circlip (Heavy Series)
Scope
Covers the requirement of circlips for shafts of nominal diameter range 3 to 300 mm in normal type and 15 to 100 mm in heavy type.
Material and Hardness
The circlips shall be manufactured from spring steel of grade EN42J and stainless steel in 304 and 316 as per DIN : 471 & IS: 3075. Hardness of circlips shall be given below:
| Nominal Diameter Of Circlips | Hardness | |
|---|---|---|
| Over | Up To | |
| - | 48 | 470 to 580 Vickers Hardness (Corresponding to 47 to 54 Rockwell C hardness) |
| 48 | 200 | 435 to 350 Vickers Hardness (Corresponding to 44 to 51 Rockwell C hardness) |
| 200 | 300 | 390 to 470 Vickers Hardness (Corresponding to 40 to 47 Rockwell C hardness) |
Finish
All sharp edges shall be removed from the circlips. The circlips shall be free from burrs, cracks, laminations and other defects. The maximum permissible deviation on the profile at engaging lip may also be mutually agreed upon between the manufacturer and the user in case of special application. Unless any alternative finish is specified by the purchaser, the circlips shall be chemically and/or thermally blackened or phosphate to class A2 of IS: 3618-1966 ‘Phosphate treatment for iron and steel for protection against corrosion’. The coated circlips shall be subjected to appropriate treatment to avoid hydrogen embrittlement.
We design and manufacture a wide range of circlips. Used as a fastener, these products are semi-flexible metal ring that comes with open ends. We offer both the types of circlips that are internal and external. The different kinds of circlips offered by us can vary in terms of dimensions and type of raw materials used. We also manufacturer and supply Snap Ring and Horse Clamp.
Internal Circlip (Light Series)
DIN : 472 IS : 3075
Internal Circlip
Internal Circlip (Heavy Series)
Scope
Covers the requirement of circlips for bored of nominal diameter range 8 to 300 mm in normal type and 20 to 100 mm in heavy type.
Material and Hardness
The circlips shall be manufactured from spring steel of Grade EN42J and Stainless steel in 304 and 316 as per DIN : 472 & IS: 3075.
Finish
All sharp edges shall be removed from the circlips. The circlips shall be free from burrs, cracks, laminations and other defects. The maximum permission deviation on the profile at engaging lip may also be mutually agreed upon between the manufacturer and user in case of special application. Unless any alternative finish is specified by the purchaser, the circlips shall be chemically and/or thermally blackened or phosphate to Class A2 of IS: 3618-1968 'phosphate treatment of iron and steel for protection against corrosion'. These coated circlips shall be subjected to appropriate treatment to avoid hydrogen embrittlement.
Scope
Covers the requirement of Circlips- type E for shafts of nominal size range of 0.8 to 24 mm.
Material and Hardness
The Circlips shall be manufactured from spring of grade such as 70C6 or 75C6 conforming to IS: 2507-1975 ‘Specification for cold rolled steel strips for springs. Hardness of Circlips shall be between 460 to 580 HV (corresponding to 46 to54 HRC).
Finish
All sharp edges shall be removed from the circlips. The circlips shall be free from burrs, cracks, laminations and other defects.
Disc Washers are conically formed angular Discs, which are loaded in the axial direction. Disc Washers offer a well-developed solution to many engineering problems. Through a unique combination of high force in a small space, Disc Washers can be used as single disc or arranged in stacks. A spring stack can consist of either single spring or parallel spring sets. Disc Washers are available with or without contact flats. Disc Washers and Belleville Washers are manufactured to DIN 2093 AND din 6796. We have computerized design programmed to assist our customers for their specified applications. Disc Washers are manufactured from imported 50CrV4 and EN42J material.
Advantages of Disc Washers
Material
Manufactured from Imported 50CrV4, EN42J, 304, 316 and Phosphorous bronz.
Disc Washers Stack Compared to Helical Spring.
Note that the same load is achieved at substantial reduction in space. Disc stacks may be designed for extremely high loads where coil springs are not feasible at all.
Wide Range of Internal & External Circlips, E-type Circlips, Dish Washers, Snap Rings, and high precision press parts as per CUSTOMER'S SPECIAL REQUIREMENTS.
As per IS & DIN STANDARDS or as per Customers design & Specifications.
Our standard products are made from HIGH CARBON COILED ROLLED STEEL to EN 42 J, EN 47, 50 CR V4 & COPPER, ALUMINIUM, S.S.304, S.S.316, 316 L and Brass specification.
Circlips and Rings can be manufactured and supplied in non-standard thickness subject to prior enquiry and quotation.
We have our own Heat Treatment plant consisting of ELECTRIC FURNACE. Different tests are carried out by qualified enginers to verify the heat treated products.
Our products are supplied in various finished like BLUING, BLACKENING PLATING as per the requirements of our customers.
As a part of ISO 9001:2008 activites, we have well defined Quality System.
We also have a quality manual, which demonstrates the quality system followed in the organization. It also specifies the company's quality policy and its objectives, which is clearly communicated and understood within the organization and reviewed periodically.
We have established Quality system Procedures in line with our Quality Policy. Work instructions, quality records, contract review, document and data control, product identification and traceability, calibration and control of inspection, measuring and test equipment are few features of our Quality System Procedures. STATISTICAL PROCESS CONTROL (SPC) is being used to continually improve the effectiveness of the Quality Management System.
Manufacturing Capabilities and Facilities
Venus Enterprises has excellent Manufacturing Facilities, with latest machineries, we have one sister concerns Royal Engineering Company which engaged in manufacturing of Press Parts and Hand Work.
Quality Assurance
Sophisticated & Well equipped mechanical, metallurgical, dimensional & functional testing facilities in house available.
Press Shop
POWER PRESSES (ranging from 10 to 150 tons), and FORMING MACHINES - used for specialized multiform jobs.
Heat Treatment & Surface Treatment
Most modernised Heat Treatment with Electric Furnaces for consistent hardness, impact strength and spring action. Various surface coating facilities like, Phosphating
LIST OF MACHINERY
| Name & Type of Machinery | Size / Capacity | Nos. |
|---|---|---|
| Lathe Machine PMT | 6ft & 8ft | 2 |
| Drilling Machine PMT | 12 mm | 1 |
| Surface Grinder PMT | 8" | 1 |
| Hand Shearing Machine | 2 Ft. | 1 |
| Milling Machine | 12 mm | 1 |
| Power Press Hedavkar & TMT | 150 ton | 1 |
| Power Press Hedavkar & TMT | 100 ton | 1 |
| Power Press Hedavkar & TMT | 50 ton | 1 |
| Power Press Hedavkar & TMT | 10 ton | 1 |
| Power Press Hedavkar & TMT | 20 ton | 2 |
| Power Press Hedavkar & TMT | 75 ton | 1 |
| Power Press Hedavkar & TMT | 5 ton | 2 |
| Power Press Hedavkar & TMT | 3 ton | 3 |
| Bench Grinder SKF | 1/2" & 1" | 1 |
| Tempering Furnace Om Eng. Co. | Round 15" | 1 |
Factory
Mobile: |
9414222280 (MAHESH GOYAL) |
||||
Mobile: |
9887410848 (T.L. GOYAL) |
||||
Email: |
venus.ent.btp@gmail.com |